BYGQG - BURKE-KRETE SBR LATEX LIQUID, CM-0270
- MSDS: BYGQG
- Manufacturer: EDOCO
- Product Name: BURKE-KRETE SBR LATEX LIQUID, CM-0270
- National Stock Number: 8010-00N062334
Product Identification
Product ID:BURKE-KRETE SBR LATEX LIQUID, CM-0270
MSDS Date:11/16/1993
FSC:8010
NIIN:00N062334
MSDS Number: BYGQG
Responsible Party
LONG BEACH, CA 90810-1681
US
Emergency Phone: 800-424-9300(CHEMTREC)
Info Phone: 310-834-3401
Preparer: PETER FUQUA
Cage: IO955
Contractor
Telephone: 310-834-3401
Cage: 22108
Ingredients
NON HAZARDOUS INGREDIENTS; (NO REPORTABLE QUANTITIES OF HAZ
OSHA PEL N/K
ACGIH TLV: N/K
0.00 LB/GL
RTECS: 9999999VO
OSHA PEL N/K
ACGIH TLV: N/K
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHALATION: MAY CAUSE DIZZINESS
OR BREATHING DIFFICULTIES WHEN WORKING IN AN AREA OF HIGH VAPOR
DENSITY. SKIN AND EYE CONTACT: MAY CAUSE IRRITATION OF SKIN OR EYES
IN EXTREME CASES. SKIN ABSORP TION: MAY CAUSE IRRITATION OR RASH IN
SENSITIVE INDIVIDUALS. INGESTION: MAY CAUSE BURNING AND (EFTS OF
OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ: IRRITATION OF THE DIGESTIVE TRACT.
CHRONIC: NONE KNOWN.
Medical Cond Aggravated by Exposure:IRRITATION OF THE EXPOSED AREA IN
SENSITIVE INDIVIDUALS.
First Aid
First Aid:SKIN AND EYES: WASH AREA WITH SOAP AND WATER FOR AT LEAST 15
MINUTES. INGESTION: CONSULT PHYSICIAN IMMEDIATELY. INHALATION: MOVE
TO FRESH AIR.
Fire Fighting
Flash Point:>212F,>100C
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL, WATER FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPRVD SCBA & FULL PROTECTIVE
EQUIPMENT . USE COMPLETE PERSONAL PROT EQUIPMENT WHEN ENTERING
CONFINED AREAS WHERE POTENTIAL EXPOS TO VAP.
Unusual Fire/Explosion Hazard:DRIED FILM IS COMBUSTABLE SIMILAR TO
WOOD, BURNING DRY RESINS EMITS DENSE BLACK SMOKE.
Accidental Release
Spill Release Procedures:USE ABSORBANT MATERIAL AND PUT IN SEALED CAN.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING.
Other Precautions:KEEP DRUMS CLOSED TIGHTLY AND IN AN UPRIGHT POSITION.
KEEP MATERIAL FROM FREEZING.
Exposure Controls
Respiratory Protection:USE ADEQUATE VENTILATION WHEN USING THIS
PRODUCT, IF THE EXPOSURE LIMITS IN INGREDIENTS SECTION ARE EXCEEDED
IN A NIOSH/MSHA APPROVED MASK WITH ORGANIC CARTRIDGE MUST BE USED.
Ventilation:NONE SPECIFIED BY MANUFACTURER.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPROVED CHEM WORKERS GOGGS .
Other Protective Equipment:EYE WASH FOUNTAIN & DELUGE SHOWER WHICH MEET
ANSI DESIGN CRITERIA .
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
NONE SPECIFIED BY MANUFACTURER.
Chemical Properties
Boiling Pt:B.P. Text:212F,100C
Vapor Density:HVR/AIR
Spec Gravity:1.00 (H*2O = 1)
Evaporation Rate & Reference:SLOWER THAN ETHER
Solubility in Water:MISCIBLE
Appearance and Odor:WHITE MIXTURE, MILD ODOR
Stability
Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS.
Stability Condition to Avoid:AVOID FREEZING MATERIAL.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE,
NITROGEN OXIDES.
Disposal
Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH LOCAL, STATE AND
FEDERAL REULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.